Maker Faire Yearbook 2023
Projects
Found 51 Results
Openpipes.org
Faire: Rome
Maker: Rodolfo Bonnin
OpenPipes is a global, open-source project that empowers DIY enthusiasts to create their own Virtual Pipe Organ
• Organ console plans, including an Arduino controlled Midi Pedalboard,
• An Arduino-based full control circuit,
• A whole set of Midi peripherals, including traditional buttonboards and OLED screens manager
• Pipebian, our own Linux based pipe organ audio engine.
• And much more!
OpenPipes invites worldwide participation, democratizing the traditional sound of Pipe Organs. Visit our exhibit to see a functional sound engine, live controllers, and 3D console models. Join us and have fun!
Precious Plastic Torino
Faire: Rome
Maker: ivan martini
Precious Plastic is an open source community that was born in 2013 by the Dutch designer Dave Hakkens. Over time it has spread all over the world with about 8,000 active recycling and dissemination centers on the subject of domestic plastic recycling with self-built machinery.
ROVRDUINO
Faire: Rome
Maker: Kristijan Nelkovski
ROVRDUINO is a small rover platform powered by an ATmega328 microcontroller. Much like the Arduino UNO, the ROVRDUINO has a "REV3" style footprint with the same headers capable of using existing Arduino shields and modules. This little robot features a variety of onboard sensors and can be programmed using the Arduino IDE. Because ROVRDUINO is intended to be a DIY kit, it can be easily soldered and assembled in just a single afternoon. While the ROVRDUINO doesn't require any advanced knowledge of electronics or microcontrollers, it can be modded and upgraded with all kinds of innovative ideas.
The Hatrix Reloaded: Heritage augmented through research, immersivity, community, sustainability
Faire: Rome
Maker: Centro di ricerca DigiLab - Sapienza Università di Roma
The Hatrix Reloaded is a container of ideas, methodologies, prototyping, digital applications, able to guarantee the coverage of a complete supply chain in designing and implementing actions in the context of heritage: 3D printing activities in the archaeological and anthropological fields, VR uses for gamification and tourism through VR and body capture tools, interventions on potential and real cases of cultural projects, practical workshops on technologies and involvement, museum education and experiences with open source software, are some of the topical aspects.
Enter The Hatrix!
I Can Feel My Legs
Faire: Rome
Maker: Gaetano Carlino
I Can Feel My Legs is a lower limb prosthesis whose purpose is to help people who have disabilities and/or difficulties in walking.
What we present is the first working prototype showing toe movement that is done through the use of a wearable sock, for the initial acquisition of movement that will then be implemented through a self-learning neural network in order to improve its efficiency and responsiveness, which will be able to simulate toe movement.
Bodynodes
Faire: Rome
Maker: Manuel Bottini
Bodynodes is a motion capture project made by a hobbyist for other hobbyists. Sensors can be worn and track the movement of the body. Then, the information can be used for different types of applications.
The most typical application is to control a character in a virtual reality game. Bodynodes makes the game more immersive than other systems because the sensors are worn and the player interacts directly with the new world. With the use of a VR headset or a VR cardboard, the player gets a fully immersive experience in the game.
The tracking information can also be used to create animations for videos or new games. Instead of going through days of animations, the animator can just track their own body and then work on the data collected using the Bodynodes sensors.
In the future, we will explore controlling drones and robots, transitioning from the virtual world to controlling the real world!
HARE, motor control board – Making mobile robots development easy
Faire: Rome
Maker: Pizza Robotics
This board is designed to simplify the life of robotic developers and mainly ROS 2 roboticists.
Hare motor control board is an open source and open hardware design and it is built around RP2040 microcontroller.
It allows to control till 4 dc motors with closed loop on encoders and a 6 axis imu with sensor fusion.
The board can be programmed in Arduino or Micropython and it is compatible with microros and ros2_amr_interface.
Motors power supply range is 7.4V to 15V.
It is possible to expand the board via I2C and UART. It is also possible to debug code using the SWD interface.
” Ascolta la vita ! “
Faire: Rome
Maker: Luciano Fumagalli
ANGELO is an open source hearing device that promotes access to hearing care for seniors and in LMICs.
With over 1.5 billion people suffering from hearing loss, often linked to cases of dementia, it represents an inclusive, economical and customizable solution: a change within reach for millions of people.
In summary, ANGELO is an equalized amplifier, which allows you to selectively enhance the relevant auditory frequencies, improving the understanding of speech and the perception of emotions related to sound.
Costume Di Scena Automatico per Danzatori e Artisti
Faire: Rome
Maker: Giorgio Liberini
A costume with integrated LEDs that light up and change color based on its position: this is the core of a project designed specifically to provide performers with an innovative tool.
The costume detects the position, and every movement gently modifies the shades, colors, and light intensity. This dynamic response is governed by specific programmable rules.
The scenic effect is extraordinary, both during rapid movements and slow movements, eliciting wonder from the audience about the connection between movement and the device's response
The Electronic Jug Band
Faire: Rome
Maker: Rick MacDonald
An exhibit showing how to use the latest low cost microcontroller and sensor technologies to create DIY electronic music instruments. The design and building of such instruments is a hands-on learning experience in both maker electronics and music concepts.
The idea is similar to the creation of a Jug Band in the mid 1900s where individuals used household materials to create their instruments and then played them together to make music. In this case however the use of modern electronics provides many more possibilities and a much larger scope for creativity.
GALDEANO, DIY Calculator with simbolic math
Faire: Rome
Maker: Angel Cabello
The heart of the machine is an esp32 with 4 Mb of SPI RAM. The PCB is a custom one, as it is the keyboard. The display (320x240) is an ili9341 with a touch sensor (resistance). It runs a custom micropython distribution with LVGL graphics with the math engine (Eigenmath) as a module. The program runs in the data partitions and it is easily customizable and extensible.
BR – Un bracciale per controllare il mondo
Faire: Rome
Maker: Agnello Pepe
IL BR is a simple wearable device that allows you to control your PC and beyond by simply moving a hand. The device recognizes the acceleration produced by movement and compares it with user-selected and fully customizable "trigger" values, so as to simulate pressing a key on the keyboard, to control various aspects of your PC, to scroll through a presentation smoothly and much more. Thanks to the Internet connection, the BR can connect to very distant devices (such as drones, radio-controlled cars and much more) and control them remotely thanks to the acceleration produced by the user. The presence of a rechargeable battery allows uninterrupted use for over 4 hours. The case like the strap are totally 3D printed so as to be light and suitable for any user. The BR is supported by a PC interface that allows you to fully customize any aspect of the device. Like “trigger” accelerations, simulated keystrokes and much more. Furthermore, once the interface is closed after connecting the device, the BR will continue to work in the background allowing for simple and fluid use.
SmartVan for Camping
Faire: Rome
Maker: Roberto Pompermaier
Using the Smart Van Box, making your camper or van smart becomes child's play.
A magic box which, in addition to managing the energy produced by the solar panels, will allow you to monitor and control the services of your camper, conveniently from the mobile app. Whether you're on the road or away from your vehicle.
Furthermore, thanks to its sensors and intelligent functions, the Smart Van Box will assist you during all phases of your journey. Taking care of your health and alerting you in case of problems. From the preparation of the trip, to the return home.
OpenPipes Revolutionizes the DIY Pipe Organs
Faire: Rome
Maker: OpenPipes
Home: Argentina
If you’ve ever dreamed of playing a majestic pipe organ but thought it was out of reach, think again. OpenPipes, a remarkable open-source project hailing from Argentina, is empowering DIY enthusiasts worldwide to create their very own Virtual Pipe Organ. With an array of accessible plans and innovative technology, OpenPipes is democratizing the traditional sound of Pipe Organs like never before.
At the heart of OpenPipes are its comprehensive organ console plans, meticulously designed to guide enthusiasts through the creation process. These plans include an Arduino-controlled Midi Pedalboard, allowing for precise control and expression. The full control circuit, also Arduino-based, provides a seamless interface between the musician and the instrument, enhancing the playing experience.
OpenPipes goes beyond the basics, offering a range of Midi peripherals to expand the possibilities of the organ. From traditional buttonboards to OLED screens managers, these peripherals add depth and flexibility to the instrument, allowing musicians to unleash their creativity fully.
One of the standout features of OpenPipes is its very own Linux-based pipe organ audio engine, aptly named Pipebian. This powerful audio engine brings the organ to life, faithfully reproducing the rich and resonant sound of traditional pipe organs. With Pipebian, musicians can immerse themselves in the grandeur of organ music, all within the realm of their DIY creation.
But OpenPipes is not just about technical specifications and digital wizardry. It is a project that encourages global participation and camaraderie. By opening up the world of pipe organs to a wider audience, OpenPipes is fostering a vibrant community of enthusiasts who share a passion for this magnificent instrument. Whether you’re a seasoned musician or an aspiring hobbyist, OpenPipes invites you to join the movement and embark on a musical adventure.
BirdWatch AI – Embedded Bird Watching Solution with TensorFlow
Faire: Rome
Maker: Enrico Stulin
BirdWatch AI is an innovative project that combines a passion for bird watching with the power of artificial intelligence. Our birdhouse with automatic recognition leverages TensorFlow to offer an unprecedented birdwatching experience.
The BirdWatch AI project encompasses the mechanical design of a bird feeder equipped with a Full HD camera (a 12-megapixel IMX708 sensor with HDR), with the primary aim to capture images and videos of visiting birds. Using TensorFlow's automatic recognition algorithm and image manipulation with OpenCV, BirdWatch AI accurately identifies the bird species present, providing detailed and engaging information for birdwatching enthusiasts.
As an open-source project, BirdWatch AI invites developers, enthusiasts, and the curious to collaborate, make modifications, and improvements. This open and collaborative aspect of the project encourages the sharing of knowledge and skills and contributes to the growth of artificial intelligence and birdwatching.
BirdWatch AI not only offers the opportunity to observe and learn more about local avian wildlife but also makes a significant impact in several areas:
Environmental education and awareness: Through our project, we aim to educate the public about bird species and their ecological importance. By presenting our sighting records and relevant information about bird behaviors, we strive to promote environmental awareness and care for biodiversity.
Contribution to scientific research: In collaboration with ornithologists and researchers, we share data collected via BirdWatch AI to contribute to understanding migratory habits, distribution patterns, and bird population dynamics. Our technology provides a novel approach for efficient and effective data collection.
Technological innovation: BirdWatch AI represents an interesting integration of nature observation and artificial intelligence. We are proud to demonstrate how the application of TensorFlow has enabled the automatic recognition of bird species, opening new perspectives for the use of AI in wildlife conservation and observation.
At Maker Faire Rome, we will present a working prototype of our birdhouse, illustrating how we use TensorFlow for automatic bird recognition. We will also display a selection of recordings that demonstrate the effectiveness of our technology. We are excited to share our project with the audience at Maker Faire Rome, inspiring others to explore the universe of birds through technological innovation.
PlasticDrawn
Faire: Rome
Maker: Martino Colucci
PLASTICDRAWN is a project that, with the help of 3D FDM printing, aims to raise awareness of the recycling of plastic packaging such as bottles and webbing. They are a frequent problem at organised events (such as trade fairs) and in logistical packaging operations (increasingly frequent nowadays), respectively.
The aim is to put into action the process of realising the idea at the fair, in a kind of performance that raises awareness of recycling, presented as a real opportunity to make products, easily visible to the public present.
Slammer: Un robot rover autonomo, nato come progetto per imparare la robotica e ROS 2
Faire: Rome
Maker: Pizza Robotics
A rover robot built as a learnign platform for robotics. Based on several open source technologies (like ROS 2), it is also used as a development platform for uNav(https://blog.alessiomorale.com/unav2/), an advanced, open, motor control platform for robotic applications. This robot uses several sensors (Depth camera, lidar, IMU & GPS) to sense the surrounding environment, map and navigate autonomously, avoiding obstacles.AI Real-Time Object Detection algorithms are used to detect objects in the surrounding environment.
Ternary Computer System
Faire: Rome
Maker: Claudio La Rosa
We design a new type of microprocessor, which works with ternary logic (instead of the usual binary).
The immediate benefits of the ternary are:
Compact information much better (than binary system);
It reduces the size of the chips (especially the memory, which today occupies most of the surface).
Our idea offers technological advantages that enable a great leap forward in traditional processing and supercomputing.
It is optimally applied to the emerging fields of artificial intelligence and the brain-machine connection. Some neurobiological research groups are implementing neural networks with modeling of neurons using three states, because this better matches the activity of neurons.
We design, write specifications (ISA) and implement ternary microprocessors.
PicoFlutter – Wearable for Learning Electronics
Faire: Rome
Maker: Alexandra Covor
PicoFlutter is a butterfly-shaped wearable development board for learning the basics of embedded programming. This educational tool is RP2040-powered and includes multiple programmable LEDs, as well as a Qwiic connector for adding sensors. This dev kit is perfect for young learners who want to have fun and create their own wearable technology while also learning about electronics, programming, and Edge ML. The device serves as a tool to connect theoretical concepts with practical applications, fostering innovative thinking and cultivating an interest in STEAM fields.
Insigno by MindsHub – Playful cleanup
Faire: Rome
Maker: Mindshub APS
Insigno is an open source cross-platform application, which has been created in response to the necessities of our local administration. Insigno enables its users to localise abandoned litter left on the ground, while at the same time engaging them by searching and collecting it. Additionally, this application devotes special attention to encouraging teenagers to use their smartphones more consciously, thanks to a fun gaming approach.
CORTEX AUTOMATIONS
Faire: Rome
Maker: luca cortelli
Cortex is the universal controller for CNC machines or industrial automation. It is equipped with the GRBL HALL firmware, a well-known open-source firmware that allows for the control of such machinery, and a customizable and expandable user interface. The controller has been designed to meet the needs of both the industrial sector and makers, ensuring the right level of safety and ease of assembly, thanks to its RJ45 connectors that simplify and speed up wiring, reducing connection errors. In this way, even those without specific knowledge in electronics or informatics can use it easily and intuitively, making work even more manageable. The main goal of the project is to create a community that can develop the CNC technologies, a sector that has been somewhat neglected compared to that of 3D printers, despite its importance in the industrial field. Cortex offers makers and industry professionals the necessary tools to develop and improve their own projects. Its flexibility and versatility make it suitable for various applications in which the control of motors, sensors, and actuators is necessary, in addition to its use on CNC machines.
Parko: Sustainable Smart Parking Solution
Faire: Rome
Maker: Khaled Atef Megahed
Parko is an innovative parking management solution that revolutionizes the way parking spaces are utilized. With our smart technology, we optimize parking efficiency, reduce congestion, and provide a seamless experience for drivers. Our system incorporates real-time monitoring, data analytics, and intuitive mobile applications to enable efficient parking space allocation and reservation. By maximizing parking utilization, Parko promotes sustainable urban mobility, reduces carbon emissions, and enhances the overall parking experience for both drivers and parking operators. Join us in transforming the future of parking with Parko!
Piaccadino^2 – titolatore automatico per alimenti
Faire: Rome
Maker: Università degli Studi della Tuscia
Piaccadino^2 is an affordable automatic titrator for analyzing organic acids in plant tissues. It uses Arduino, a pH probe, a thermoresistor, and a stepper motor. Improvements include enhanced precision, wireless connectivity, and Python programmability. Suitable for research and education, it offers a low-cost and customizable solution for more accurate and reproducible titrations.
Rosa Di Scena Luminosa Radiocomandata
Faire: Rome
Maker: Giorgio Liberini
A remote-controlled rose, an integral part of the 'Frantumi' performance by Mizar Tagliavini. This rose illuminates during the show thanks to a NodeMCU and a neopixel matrix. Additionally, it uses micro wireless LEDs as an alternative light source and harnesses a magnetic field generated by an invisible copper coil. The aim is to unite art and science, demonstrating the interdependence between creativity and innovation. We hope to inspire people and bring them closer to theater through science, as well as introduce them to technology through a love for the theater
